 |
 |
 |
 |
 |
 |
 The H2Flow Magnetic Water ConditionerHow much will it cost? Each H2Flow module costs £65  Post free to the UK, a small charge to the rest of the world How does it work? You will see from the studies that the mechanism is not fully understood. Experience has shown that to treat water successfully a strong magnetic field and a turbulent water flow is required. Some manufacturers use highly engineered in-line devices to produce a turbulent flow through the magnetic field. Our unique selling point is a pole configuration that produces a turbulent magnetic field within the pipe. Our device can be used at any flow rate and with any diameter of pipe. No pipes need to be cut, there is no alteration to the pipework and our modules make no contact with the water. How can a field from a static magnet be turbulent? Well, strictly speaking it can't, but as water flows through the field it sees a constantly changing, 'turbulent' magnetic field with a high field gradient. This turbulent field is the secret of Ecoflow's success in the water & fuel treatment and magnotherapy fields. How many do I need? First, you cannot 'over-magnetise' water. If you are not getting the results you need, just add more units. Our rule of thumb is to fit as many units as will go round the pipe and the same number along the pipe 15mm/0.5 inch pipe = 1 x H2flow by 1 wide = 1 total 19mm/0.75 inch pipe = 2 x H2flow by 1 wide = 2 total 25mm/1 inch pipe = 2 x H2flow by 1 wide = 2 total 33mm/1.25 inch pipe = 2 x H2flow by 2 wide = 4 total 38mm/1.5 inch pipe = 2 x H2flow by 2 wide = 4 total 51mm/2 inch pipe = 3 x H2flow by 3 wide = 9 total 64mm/2.5 inch pipe = 4 x H2flow by 4 wide = 16 total 76mm/3 inch pipe = 4 x H2flow by 4 wide = 16 total 98mm/3.5 inch pipe = 5 x H2flow by 5 wide = 25 total 102mm/4 inch pipe = 6 x H2flow by 6 wide = 36 total 114mm/4.5 inch pipe = 7 x H2flow by 7 wide = 49 total Where do I put them? Where the water enters your premises. This way the output of every tap is treated. But there is one problem. If water is stored in holding tanks for a period of time, it will gradually lose the effects of magnetic treatment. So you may need to fit H2flows on the output of each holding tank. Want more information? Email us with your queries |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
